RICH SOLAR 30 Amp PWM Solar Charge Controller Negative Ground



  • Automatic system voltage identification
  • Charging program options for sealed, GEL and flooded lead-acid batteries and lithium batteries are available.
  • An upgraded 3-stage PWM charging algorithm is adopted. Application of an equalizing charge to the battery periodically or when over discharged can effectively prevent the battery from non-equalization and sulfuration, thus extending the battery's service life (with the exception of GEL and lithium batteries).
  • With temperature compensation employed, charging parameters can be automatically adjusted (with the exception of lithium batteries).
  • A wide range of load working modes facilitate the product's application to different types of street lights and monitoring devices.
  • The product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection.
  • By virtue of an advanced load starting method, large-capacitance loads can be started smoothly.
  • A range of parameter settings and power-down saving functions are available, thus requiring no repeated setting.
  • The product provides a dot matrix graphic LCD screen and a human-machine interface with 2 keys.
  • The user-friendly design of browser and dynamic interfaces ensures convenient and intuitive operations.
  • (An optional communication function) provides a RJ12 data port (output of TTL232 level or bluetooth signals), with the data adopting the standard Modbus protocol, and can be used together with our upper computer monitoring software or mobile phone APP.
  • Boasting an industrial grade design, the product can function well in various tough conditions.
  • It features a backlit display, and the backlight will be turned on with a key pressed and turned off over a period of time.
  • TVS lighting protection is adopted.


  1. SKU: SOL-PWM30
  2. Model: HP2430N
  3. Rated Current: 30A
  4. System Voltage: Automatic recognition of 12V/24V; Manual setup
  5. Rated Power: 12V/450W; 24V/900W
  6. No-Load Loss: 22mA/12V; 16mA/ 24V
  7. Max. Solar Energy Input  Voltage: 55V
  8. Max. Voltage At The Battery End: 34V
  9. Battery Type: FLD, SLD, GEL, LI
  10. Over-Voltage Protection: 16.0V
  11. Equalizing Charging Voltage: 14.8V
  12. Boost Charging Voltage: 14.6V
  13. Floating Charging Voltage: 13.8V
  14. Charging Recovery Voltage: 13.2V
  15. Over-Discharge Recovery Voltage: 12.5V (settable with the keys)
  16. Over-Discharge Voltage: 11.0V (settable with the keys)
  17. Equalizing Charging Interval: 30 days
  18. Equalizing Charging Time: 1H
  19. Boost Charging Time: 2H
  20. Temperature Compensation: -3.0mV/°C/2V
  21. Light Control Voltage: Light control on 5V, light control off 6 V (light control on plus 1V)
  22. Light Control Judgment Time: 10 minutes
  23. USB Function: Yes
  24. Operating Temperature: -25°C to +55°C
  25. Over Temperature Protection: When temperature is above 60°C; charging function is turned off, and the function is recovered when temperature is below 55°C; When temperature is above 70°C; load starting function is turned off, and the function is recovered when temperature is below 60°C.
  26. IP Protection Rating: IP30
  27. Net Weight: 1.54 lbs (700 g)
  28. Protection Functions: Battery plate reverse connection protection, a battery reverse connection protection, charging battery board short circuit protection, charging the battery open circuit protection, charging over current protection, overload protection, load short-circuit protection controller and over temperature protection.
  29. Dimensions: 65.4 x 46.54x 20.7 inches (166.0 x 118.2 x 52.6 mm)


Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 1 review Write a review

You recently viewed

Clear recently viewed